Short answer: from 1 October 2026, solar systems larger than 100 kW and up to 1 MW can become eligible for small-scale technology certificates (STCs) under the Small-scale Renewable Energy Scheme, subject to regulations, the federal government announced on 5 August 2026. For Perth warehouses, cold stores, farms and community facilities, that means an upfront discount on mid-scale solar that previously had to go through the large-scale scheme. Eligible systems will use a 5-year deeming period each year to 2030.
Until now, small-scale STCs only applied to solar systems under 100 kW. Bigger systems created large-scale certificates instead, which pay out over time rather than as an upfront discount. According to the Clean Energy Regulator's June quarter 2026 report:
Daytime-heavy businesses suit solar because they consume output as it is generated, rather than exporting it.
Using the standard formula and Perth's zone 3 rating of 1.382 MWh per kW, with a 5-year deeming period:
| System size | Calculation | STCs | Approx. value at $40 |
|---|---|---|---|
| 150 kW | 150 x 1.382 x 5 | 1,036 | $41,440 |
| 300 kW | 300 x 1.382 x 5 | 2,073 | $82,920 |
| 500 kW | 500 x 1.382 x 5 | 3,455 | $138,200 |
| 1,000 kW | 1,000 x 1.382 x 5 | 6,910 | $276,400 |
These figures assume the final regulations follow the standard formula with zone 3 ratings. Treat them as indicative until the rules and the regulator's guidance are published in full. STC prices were close to $40 through the June quarter of 2026.
For business sites in Perth, the grid connection often matters more than the rebate. Systems above the 30 kVA standard connection limit on the SWIS need a separate Western Power application, which can involve studies, protection equipment and export limits. The federal government has asked the Australian Energy Market Commission to look at rule changes to improve commercial and industrial solar connection processes, according to the regulator, though those relate to the national market.
Plan for:
Business tariffs differ from residential ones, and Synergy sets separate tariffs for business customers. Businesses should model savings on their own tariff, including any demand charges, which solar may not reduce if peak demand occurs after sunset.
Small business batteries can qualify for the federal Cheaper Home Batteries Program, which covers homes, small businesses and community organisations. The program funds the first 50 kWh of usable capacity, with the 2026 taper. Larger commercial batteries are usually justified on demand-charge reduction rather than rebates.
Information on commercial solar for Perth businesses gives a starting point for scoping. Installers with commercial experience, including Fusion Sun Solar in Perth, can help with the Western Power process, and this set of Perth solar planning notes for businesses has more on feasibility studies.
From 1 October 2026, subject to the regulations, per the federal announcement reported by the Clean Energy Regulator.
A 5-year deeming period each year to 2030, rather than the declining period for small systems.
Yes. Systems above the standard connection limit need a separate application.
The Cheaper Home Batteries Program covers small businesses for the first 50 kWh of usable capacity.
The October 2026 change brings a meaningful upfront discount to mid-scale solar for the first time. For Perth businesses with big roofs and daytime loads, the window to 2030 is worth planning for now, starting with the grid connection.

About the Author
The Perth Solar Guide editorial team writes plain-English explainers on solar panels, inverters and batteries for Western Australian homes, drawing on local installer experience and current WA rebate rules.
JOIN MY MAILING LIST